Popularview.net is just another site…

Category: Home Renovation

Safety Tips In the Installation of Insulation

Insulation are commonly used and installed on houses to keep warm air out during the hot season and cool breeze from getting inside the structure when the weather is cold. There are many benefits a person can have from putting up materials for insulating purposes. Among these are reduction of energy consumption, enhanced durability of walls, floor, and ceiling, and fire resistance. All of these can be acquired though when you have successfully put up your preferred insulation material on wherever location you would like to install it.

Be Cautious Always

Learning how to install the insulation in the safest and most appropriate method helps a lot with the outcome of the project. There are several techniques for the installation of these materials. However, the best among these is the one with the safest method. Do not compromise your safety whenever you set up these stuffs on your house. Remember that you will be handling tools that can be quite risky when mishandled.

  • Precaution – make sure that you are wearing something that will protect you from possible risks and dangers during the installation process. Never put your guard down by assuming that nothing bad will go wrong. This is the most common mistake of some individuals who had suffered accidents during the setting up of the insulation. Hand gloves, eye goggles, working clothes, and hard hats are among the protective gears that should be prepared and worn during the project.
  • Proper Tool Handling – most of the accidents during the installation process happen with the improper use of tools especially the ones used for cutting purposes. If you are not skilled or experienced in handling such types of tools, it is very important to be very careful with every movement you make while holding on the instrument.
  • Wiring and Plumbing – make sure that you know where the wires and pipes are located to avoid having problems during the installation process. It is very important that you have the blueprint of the house while you are doing the project. This will save you time on looking out for the wiring and plumbing. Aside from preventing additional expenses on the possible repairs or replacements when you hit wires and pipes, this will also avoid definite harm from getting electrocuted.
  • Materials – be very careful when it comes to handling your insulation materials as most of these are expensive. You do not want to spend other funds on replacing damaged materials as this would be quite an investment on your part. It is important to be accurate when you are cutting and securing the product on your walls, ceiling, and floor.
  • Inspect – make a quick yet thorough inspection all over the insulated area to ensure a successful and safe job. Check out the spots where possible wiring or plumbing are embedded to know whether you had hit one or not. Carrying out an inspection task right after the completion of the project would definitely prevent possible problems in the long run.

November 30, 2013     0 Comments

Great Tips for Moss Removal on Roofs

Houses are built and designed with roofs for various important purposes. Among these include the objective of deflecting rain. Another is keeping a shady environment for the people who are living inside the structure. For many homeowners, roofs are also made to highlight the beauty of their abodes especially those that were carefully planned and well spent for. However, having these wonderful structures also demands time, effort, and money in terms of maintenance. Moss is one of the most stubborn problems of any homeowner aside from dirt, dust, and debris.

Moss Propagation Areas

Moss removal tips are among the popular and hottest topics in the Internet nowadays. This is due to the growing demand of an effective and successful solution to prevent the infestation of these plants on our roofs. Moss propagates and thrives perfectly on shady and damp places. These spots are the cracks, crevices, and overlapping areas on our roofs where they make their perfect places. They thrive easily especially during the rainy season.

How to Get Rid

Chemical products are commonly used in getting rid of moss as well as weeds on the roof as these are great for killing them. However, there are also many disadvantages when using these synthetic products. Negative effects such as health problems as well as some types of materials are prone to discoloration.

High pressure water spray is a good solution in preventing the propagation of moss on the roof. This can dislodge the plant from where it sits. However, vigorous scrubbing should follow in order to make sure that these do not grow back right after a few days. These are really stubborn and hard to eliminate. Although this is a good method in keeping their growth and production at bay, this is just a temporary method. This will not prevent moss from growing back over and over again. When using this technique, be very careful on where you point the sprayer as you can also cause damages on the roof especially on slate tiles as you can dislodge them accidentally.

Detergent and bleach mixed with hot water is also a natural option. This is an alternative approach if you are not into the utilization of chemical products. These can be used on pressure spray in order to be broadcasted on the roof. In most cases, this solution is left to penetrate the roots of the moss and weeds for one or two days depending on the degree of infestation. Climbing up on the roof immediately after spraying the mixture can be very dangerous due to the slippery condition of the tiles which can definitely cause accidents. The second day after the use of the solution is the best time to go up and scrub the roof off with a good brush. Always remember to be extra careful when working above the house. This can also do more harm than good in case you dislodged or broke any material on your roof.

Manual digging is also an option. However, this can be quite laborious and time consuming on your part. This should be the last among the choices of homeowners.

November 19, 2013     0 Comments

Tips about Exterior Wall Repainting

Beautiful walls are the products of good maintenance and proper care. This is especially true with exterior walls as they are much prone to all types of weather conditions that constantly bombard them the whole year round. No matter how hard we try on keeping our walls in top condition, repainting jobs would definitely take place to spruce them up again. Although this process can be quite expensive especially on larger scales of work, this action will definitely save you more on your fortune as giving less importance to this will greatly affect and contribute to bigger damages on your walls.

Exterior wall repainting can be quite difficult especially for those who are not good at handling brushes and paint rollers. However, this can be learned by any average person though. Research will also help a lot in your quest on providing the proper solution to the problems of your exterior walls. In addition, talking to experts will also improve your knowledge regarding the painting materials, tips, and techniques that you can use for the project. Below are some pointers how you can handle your exterior wall repainting issues.

  • Clean – as far as repainting goes, this project will not be successful and effective without a proper cleaning process. If you think that cleaning the exterior wall or any surface that you would like to repaint is just to keep it clean before you start, then you get the wrong idea. Getting rid of dirt and tiny debris caught on the surface of any structure in need of repainting job is a must. This is a basic activity that you have to do if you want to avoid any problems in the future. Peeling, cracking, inter-coating peeling, and blistering are among the common issues that are caused by poor cleaning and maintenance prior to the retouching and repainting job. If your base is not clean, expect a lot of problems in the future on your painting jobs.
  • Peel Off Old Paint – in case you are up to the task of repainting walls that have old paint that are ready to go off the surface, make sure that you remove the material first before you proceed with the project. Never apply new paint material on top of the old, peeling off paint if you do not want to encounter more serious problems in the long run. Obviously, this is a sign that your wall requires new material as well as the disposal of the old ones. You can always use products designed to remove old paints or you can manually peel off the paint using scraping tools. Remember that your must be really clean in order to avoid the same peeling off problems in the future.
  • Eliminate Moisture Problems – one of the common causes of paint problems on the exterior walls is moisture. Make sure that your walls are free or protected from any liquid in order to keep them in their top form throughout the whole year. You can always apply water repellent products on the surface of the wall to get rid of moisture, especially on wooden walls. Don’t apply paint on newly plastered walls. Let it dry properly and emit all the moisture in it. Don’t rush your painting job as it will come back to you as back job.
  • Cover everything – do not leave spots without being repainted as these will be the entry point where water and moisture will accumulate. In return, this will gradually damage and destroy the integrity of your wall as well as the paint. Make sure to coat and cover every area of the exterior wall to prevent from making this mistake.

A good painting job contributes significantly to the entire looks of a structure. It is more beautiful if the building will not require a repainting within a couple of months. This is possible if you followed the tips mentioned above.

April 5, 2013     0 Comments